You appear to be using incognito/private browsing mode or an ad blocker, which may adversely affect your experience on the site. Please disable any ad blockers and view the site in non-private mode.
{
"ProductData": {
"RelatedLinks": "",
"RegulatoryDisclaimer1": "For use in quality control / manufacturing process only.",
"RegulatoryDisclaimer2": "",
"StainLocalization": [
""
],
"DisclaimerGroup2": null,
"ProductNameGlobal": "Glycerol Bio",
"DisclaimerGroup1": "",
"ControlTissue": [
""
],
"BrandName": "Glycerol Bio",
"LicenseDisclaimers": [
],
"Isotypes": "",
"RegulatoryDisclaimer3": "",
"ID": "3.8.10.2.4.13",
"ProductNameAddition": "Test kit for the Cedex Bio Analyzer",
"Species": [
""
],
"Clone": ""
},
"ProductSpec": {
"ProductSpecVariant": {
"Chapters": [
{
"Language": "English",
"Value": "Store the reagent at +2 to +8°C.",
"Name": "Storage Conditions (Product)"
},
{
"Language": "English",
"Value": "Keep at +2 to +10°C for on-board use. On-board stability: After first use on the instrument, the reagent is stable for up to 4 weeks.",
"Name": "Storage Conditions (Working Solution)"
},
{
"Language": "English",
"Value": "Method: Enzymatic photometric assay using glycerol kinase and glycerol-3-phosphate oxidase. Recovery: ±10%",
"Name": "CB - Specification"
},
{
"Language": "English",
"Value": "Glycerol concentration can be determined in following range
GLYB: 9.21 to 921 mg/L (0.1 to 10 mmol/L)
GLYD: 92.1 to 9210 mg/L (1 to 100 mmol/L)
up to 92 g/L (1 mol/L) with postdilution
Conversion factors for cholesterol concentration
1 mmol/L = 92.09 mg/L
1 mg/L = 10.86 μmol/L
Traceability This method has been standardized against isotope dilution mass spectrometry (ID-MS).
Precision Representative performance data on Cedex Bio Analyzers are shown. Results obtained in individual laboratories may differ. Precision was determined in samples of three concentration levels. Coefficients of variation (CV) were calculated for in-run precision (n=21) and inter-run precision (on 10 days).
Level 1
Level 2
Level 3
Mean
1.36 mmol/L (125 mg/L)
2.34 mmol/L (216 mg/L)
5.94 mmol//L (547 mg/L)
CV in-run
0.6%
0.8%
0.8%
CV inter-run
1.6%
1.7%
2.6%
",
"Name": "Background Information - Help Corner"
},
{
"Language": "English",
"Value": "This product is intended for quantitative determination of glycerol in aqueous solutions using the Cedex Bio Instrument.",
"Name": "Product Description"
},
{
"Language": "English",
"Value": "Glycerol is phosphorylated by adenosine triphosphate (ATP) and then oxidized to dihydroxyacetone phosphate (DHA-P) and hydrogen peroxide in the presence of glycerol kinase (GK) and glycerol-3-phosphate oxidase (GPO). The generated hydrogen peroxide reacts with 4-aminoantipyrine (4-AAP) and 4-chlorophenol (4-CP) catalyzed by peroxidase (POD) to form red-colored 4-(p-benzoquinone-monoimino)-phenazone. The increase in photometric absorbance of the generated dye is directly proportional to the glycerol concentration.
",
"Name": "Principle"
},
{
"Language": "English",
"Value": "GLYB is the standard protocol for glycerol determination. If the glycerol concentration of samples is higher than 10 mmol/L (921 mg/L), protocol GLYD should be used (same protocol with preset 1:10 sample predilution). Results higher than the valid measuring range will be flagged and a rerun with an automatic 1:10 predilution will be recommended by the software.
Cedex Bio test definition Measuring mode Absorbance Abs. calculation mode Endpoint Reaction direction Increase Wavelength A/B 512/659 nm Calc. first/last 6/21 Unit mmol/L Reaction mode R1-S
Calibration Calibrator Calibrator A Bio (CAL A, 599) Calibration mode Linear regression Calibration interval Each new lot, and if recalibration is required due to QC results
Quality controls Control A Level 1 Bio (CONA1, 111) Control A Level 2 Bio (CONA2, 112) Control A Level 3 Bio (CONA3, 113)
Use the recommended control material. Other suitable control material can be used in addition.
Control intervals and acceptance limits should be adapted to each laboratory's individual requirements. If values do not fall within the defined limits, corrective measures and recalibration are required",
"Name": "Protocols - Help Corner"
},
{
"Language": "English",
"Value": "Unit of measure is \"piece\".",
"Name": "CB - Order Information"
},
{
"Language": "English",
"Value": "
Cedex Bio Analyzer*, including accessories and disposables
Standard laboratory equipment
Calibrators and Controls
Calibrator A Bio*
Control A Level 1 Bio*
Control A Level 2 Bio*
Control A Level 3 Bio*
",
"Name": "Additional Equipment and Reagent Required"
},
{
"Language": "English",
"Value": "Glycerol can be used as source of carbon and energy in microbial fermentation. In order to provide sufficient supply and to avoid inhibition by high concentrations, the optimal feeding with glycerol should be according to the actual consumption. For control of culture media and for monitoring in a culture process, the glycerol concentration can be determined on a Cedex Bio or Cedex Bio HT Analyzer with high reliability and convenience.",
"Name": "Applications"
},
{
"Language": "English",
"Value": "Method: Enzymatic photometric assay using glycerol kinase and glycerol-3-phosphate oxidase. Recovery: ±10%",
"Name": "Specification"
}
]
}
},
"Product2Taxomony": {
"Product2TaxomonyReferences": [
{
"StructureSystemName": "OWP Product Solutions",
"NodeName": "CustomBiotech",
"StructureSystemID": null,
"NodeID": "520"
},
{
"StructureSystemName": "OWP Product Types",
"NodeName": "Assays, Reagents and Strips",
"StructureSystemID": null,
"NodeID": "20-000-00"
},
{
"StructureSystemName": "OWP Organization",
"NodeName": "Roche Diagnostics Solution (RDS)->Customer Areas->Core lab->CustomBiotech and LifeScience",
"StructureSystemID": null,
"NodeID": "01-01-01-07-00"
},
{
"StructureSystemName": "Product Grouping",
"NodeName": "CustomBiotech->Cedex Bio Analyzer Products",
"StructureSystemID": null,
"NodeID": "02-0009"
},
{
"StructureSystemName": "OWP Family",
"NodeName": "Cedex",
"StructureSystemID": null,
"NodeID": "490"
}
]
},
"Product2Materials": {
"P2MaterialReferences": [
{
"MaterialNum": "07374607001",
"MaterialDescription": "Glycerol Bio",
"RegisteredProductName": "",
"GTIN": "07613336101094",
"ProductCategoryText": "Reagents, kits",
"OldMaterialNumber": "",
"PackSizePIM360": "200 tests",
"PackSizeDescPIM360": "",
"MaterialAnnotation": "CustomBiotech product. Please contact your local representative.",
"ReadyForUse": "true",
"OrderInformation": "Unit of measure is \"piece\"."
}
]
},
"Product2Products": {
"Product2ProductReference": [
{
"ProductID": "3.8.10.1.2.16",
"BrandName": "Control A Level 1 Bio",
"ProductNameAddition": "Control reagent for the Cedex Bio and Cedex Bio HT Analyzers",
"ReferenceType": "Reagent"
},
{
"ProductID": "3.8.10.1.2.15",
"BrandName": "Calibrator A Bio",
"ProductNameAddition": "Calibrator reagent for the Cedex Bio and Cedex Bio HT Analyzers",
"ReferenceType": "Reagent"
},
{
"ProductID": "3.8.10.1.2.17",
"BrandName": "Control A Level 2 Bio",
"ProductNameAddition": "Control reagent for the Cedex Bio and Cedex Bio HT Analyzers",
"ReferenceType": "Reagent"
},
{
"ProductID": "3.8.10.1.2.18",
"BrandName": "Control A Level 3 Bio",
"ProductNameAddition": "Control reagent for the Cedex Bio and Cedex Bio HT Analyzers",
"ReferenceType": "Reagent"
}
]
}
}
For measurement of acute pancreatitis (pancreatic α-amylase) in human serum and urine selective blocking of salivary α-amylase isoenzyme is achieved in the presence of the pancreatic h-α-amylase.Qualified for thecobas platforms.
Product Description
For measurement of acute pancreatitis (pancreatic α-amylase) in human serum and urine selective blocking of salivary α-amylase isoenzyme is achieved in the presence of the pancreatic h-α-amylase.Qualified for thecobas platforms.
Ordering
Name
PackSizePIM360
Description
11543601103
custom fill
MAKM-Tu66C7-IgG(BR)SQ
Notes
Will be supplied as "MAK<H-S-Amy>M-Tu66C7-IgG(BR)SQ". Unit of measure is "g active ingredient".
