You appear to be using incognito/private browsing mode or an ad blocker, which may adversely affect your experience on the site. Please disable any ad blockers and view the site in non-private mode.
Remove any air bubbles by microcentrifugation for 10 to 20 seconds.
Use this control as described in the Instructions for Use of the respective assay.
For information about working with barcodes, refer to the respective Operator's Manual. When the barcode information is scanned into the Bio HT Analyzer Software, the 3s value will automatically be used for the Permissible Deviation in the Accuracy Mode.
",
"Language": "en",
"Country": "XG",
"Code": "Protocols"
},
{
"Name": "Applications",
"Value": "For control of test accuracy on Cedex Bio and Cedex Bio HT Analyzers.",
"Language": "en",
"Country": "XG",
"Code": "Applications"
},
{
"Name": "Protocols - Help Corner",
"Value": "Rule 1 settings for Quality Control (QC) on the Cedex Bio Analyzer
Roche recommends starting with a three-fold of the value of the standard deviation, 1s, defined for each analyte in the relevant lot-specific Instructions for Use for Controls. The value is defined in Utilities->Configuration->QC->Rule 1->3s. However, each lab must determine the appropriate values according to local preferences or requirements.",
"Language": "en",
"Country": "XG",
"Code": "Protocols - Help Corner"
},
{
"Name": "CB - Order Information",
"Value": "Unit of measure is \"piece\".",
"Language": "en",
"Country": "XG",
"Code": "CB - Order Information"
},
{
"Name": "Intended Use",
"Value": "This product is intended for quality control by monitoring accuracy and precision of quantitative assays using Cedex Bio and Bio HT Analyzers*:
Acetate (AC2B, AC2D)
Ala-Gln (AQB, AQD)
Arabinose (ARAB, ARAD)
Formate (FORB, FORD)
Galactose (GAL2B, GAL2D)
Nitrate (NO3B)
Pyruvate (PYRB, PYRD)
Sucrose (SUCB, SUCD)
",
"Language": "en",
"Country": "XG",
"Code": "Intended Use"
},
{
"Name": "Positioning",
"Value": "Multi-control solution.",
"Language": "en",
"Country": "XG",
"Code": "Positioning"
},
{
"Name": "Specification",
"Value": "Control solution with target values for the concentrations of following analytes: Acetate, Formate, Galactose, Pyruvate, Sucrose. Appearance: Clear, colorless solution. Stability: At +2 to +8°C within specification for 12 months.",
"Language": "en",
"Country": "XG",
"Code": "Specification"
},
{
"Name": "Product Characteristics",
"Value": "Control Code: COND2, 308, 07-1144-6",
"Language": "en",
"Country": "XG",
"Code": "Product Characteristics"
},
{
"Name": "Content",
"Value": "